This post contains affiliate links. Read the full disclosure here.
Typically, when you get your Sonos speaker you’d want to make use of it anytime or anywhere irrespective of the weather condition then a lot of questions would keep popping up in your head like “Can Sonos speakers get wet?”. I’m sure you are craving an answer, so the bigger news here is, I have an answer for you.
Yes, Sonos speakers can partially get wet, but its IP56 rating implies that you shouldn’t worry if you accidentally drop it in water.
However, you would have to safeguard your Sonos speakers if you are trapped in a rainstorm or any wet condition that would make your speakers expose to water for a prolonged period.
Most reviews stated that it’s not advisable to put the Sonos speaker outdoors, but Sonos has put up a good pattern in creating the move more strongly than any of its forenamed speakers most important is considering that it would be subjected to many environments.
However, the IP56 rating as said earlier stated conveys that you have to secure the Sonos speakers in a rainstorm.
How do I care for my speaker when wet?
If you get caught in a rainstorm with your speakers and they get wet, you just have to follow the steps below.
Pour out the water from the speaker
Make use of a soft dry cloth or towel to clean off the water on the speaker
In cold areas, abandoning the water on the speaker’s surface might stimulate the speaker to malfunction or freeze.
Ensure that you clean off the moisture after making use of the speaker.
Set the speaker on a soft dry towel or cloth.
Put it at room temperature and ensure that you dry the speaker until there’s no water remaining.
Read Also: Can Alexa Play Sonos Music Library?
How to prevent your Sonos speaker from getting wet
Since Sonos speakers are partially water-resistant due to the IP56 ratings, you are advised not to keep your speakers outdoors, especially during storms. Ensure they are cleaned up properly the moment they get dropped accidentally in water or any liquid substance.
Sonos speakers are quite expensive, and it’s only normal to protect your investment. If you are near a pool, keep it in areas where the pool splash will be difficult to reach, especially if it’s a public pool.
How do I connect my Sonos speakers to my TV wirelessly?
One of the important advantages of the Sonos speaker system is that you can make use of them wirelessly.
You would not have to connect one speaker to another and stimulate a technical masterwork within your house’s media region, rather, you could connect the speakers via Wi-Fi and manage them on your Sonos application – note that connecting the exact Sonos speakers is always achieved with a wired format.
Regardless of this fact, do not be frightened, you could still wirelessly connect your Sonos speakers to your TV so that there are no cluttered wires hurling fright on your Sonos speaker’s glamorous aesthetic that you laboured so hard to earn.
You have a few steps on how to connect your Sonos speakers to your TV wirelessly. You can:
- Connect your Sonos speakers to the TV via Bluetooth only on Bluetooth-enabled TVs and speakers.
- Make use of the Sonos application to connect the system but connect in the exact soundbar.
- Make use of an APTX BT transmitter as a sound receiver that connects to the TV without wanting a wired connection to your speakers.
Let’s look into these steps on how to connect your Sonos to TV wirelessly.
Step 1: Connect your Sonos speakers to the TV through Bluetooth
To connect your Sonos speakers to your TV through Bluetooth, you would have to ensure that the speaker and the TV support Bluetooth.
This could be thorough surveillance to most skilled audio or sound buff, but it’s quite a straightforward process.
You may be scheduling on pairing your two devices in this manner, but if you have ignored the validity that one of these two devices is not Bluetooth enabled then you may completely look for another alternative.
You would have to make use of the TV’s streaming service to connect your Sonos speakers to the TV through Bluetooth and plug into the Sonos speaker as Bluetooth.
For instance, if you make use of Hulu, you could navigate to the settings domains and while the Sonos Bluetooth enabled speakers are powered on and available to connect, you would pick this speaker.
Then both the TV and the Sonos speakers would pair wirelessly with the use of the Bluetooth connection proposed through the streaming service and the speaker.
Although, you have to know that not all Sonos speakers are Bluetooth compatible as the speaker system was inferred to deliver a Wi-Fi-enabled way of connecting your sound speaker.
Nonetheless, if you buy the Sonos Bluetooth enabled speaker, this step is very simple and you would effortlessly be proficient to turn on the Bluetooth with the touch of a button on your speakers and you can proceed by pairing your speakers to your TV.
NB – bear in mind that the speakers have to be of high quality if you are intending to stream any type of movie or TV shows on your TV.
Most speakers, comprising of some Sonos speakers work best with TV music streaming but are not for movie watching depending on the Wi-Fi connection that they depend on.
So please kindly pay attention to reviews of numerous speakers as I have discovered they choose to prefer this speaker (click here for more details) for movie entertainment.
Step 2: Make use of the Sonos application
Another most interesting thing about watching movies with Sonos is the new set of speakers that come with an application (click here for more details) and could be regulated remotely from your network or Wi-Fi-enabled mobile phone or PC.
This is mostly useful because you could regulate each speaker from the convenience of your sofa, rather than having to diversify your speakers manually, you could adjust them from your mobile phone or PC.
This would function as you connect each Sonos speaker to the same Wi-Fi connection as your mobile phone or PC, anyone, you intend to make use of as the regulator. Making use of the Sonos application on the regulator you decide to use, you could utilize the volume for the audio experience of your dreams.
To do this, you would still have to connect one of the speakers to your TV through a wired connection.
This step is almost certain to work because a lot of persons have given it a try, and also because it employs that there would only be one wire to connect the whole system of speakers instead of connecting numerous speakers in the mess of wires.
Read Also: Does Echo Show Work With Sonos?
With the use of the Sonos application, connect your Sonos speakers to the Wi-Fi connection that is paired to your Wi-Fi-enabled mobile phone or PC one after the other.
Immediately you have stabilized a connection with all the speakers in the system, you would have to connect them again to the main soundbar.
Here again, you would be making use of a wired connection for the main speaker, but the remaining Sonos speaker in your system would be connected to an application so you would still sustain a moderately wireless connection.
Read Also: Can Sonos Speakers Work Without WiFi?
Step 3: Make use of an APTX BT transmitter as a sound receiver
Another step to connect your Sonos speakers wirelessly to your TV is to make use of a connecting appliance that would allow your speakers to work with your TV through Bluetooth.
This navigates back to presuming that your Sonos speakers are Bluetooth enabled so it is very important to examine to ensure that it is before using this step.
If you are not making use of a TV streaming service such as the Hulu example I gave above, then you may need an APTX BT transmitter (click here for more details) to function as the Bluetooth audio receiver that could connect to the audio input or output receiver on your TV.
This attachment functions in essence as equipment that whirls your TV to a Bluetooth-enabled device whether or not your streaming device typically allows this.
Fortunately, APTX BT transmitters are not expensive and they are very easy to use. APTX BT transmitter is an audio receiver that connects to the TV without the use of a wired connection to your speakers.
Rather than having to plug in your speakers, you would have to connect them through Bluetooth to this transmitter. To be able to do this, you would have to allow the Bluetooth capacities on the two Sonos speakers and the APTX BT transmitter.
You would plug the transmitter into the audio input or output jacks rightly. The receivers might be different on your transmitter but they should be very clear.
If your TV does not have the port labelled for audio output, then you should be able to use the headphone jack, because this serves a dual purpose.
Ensure that your transmitter is connected to your TV and your Sonos speakers are also enabled through Wi-Fi. Wait till the two devices which is the transmitter and the speakers are paired with each other.
Now, when you do not intend to make use of the speakers in the intersection with your TV, you can adjust the unit in the transmitter and the other two devices will not be paired.
Though this might seem like a curved way to connect your speakers, it is very simple when you have enabled the transmitter and the speakers.
Additionally, you could connect the prevalence of your speakers in your sound speaker system to the exact speaker through Wi-Fi and just connect that one to the transmitter – you would not need to go through a lot of circles.
The ones that you would do will necessarily ascertain to be worth it with the high-quality audio streaming that is given by the Sonos sound speaker system.
Can external speakers be connected to a TV?
No, you cannot connect external speakers directly to the TV. There’s no common set of TV audio outputs, though most have stereo jacks. For televisions with just an HDMI output jack, it is still very possible to connect an external speaker or amp.
Do all smart TVs have Bluetooth?
No, not all smart TVs have Bluetooth. This is because this feature was leased for the flagship models but as the rivalry hardens between brands, manufacturers have started to add it in the lower tier models as an influence for more consumers.
Can Sonos move work without Wi-Fi?
Yes, the Sonos move can work without Wi-Fi. The Sonos move is the first developed Sonos speaker that you can make use of it outside of the Wi-Fi network that it’s connected to. You could make use of it on Wi-Fi like any Sonos speaker or you could power on Bluetooth.
Can Sonos Speakers Get Wet – Conclusion
As stated earlier, the Sonos speakers can get wet but its IP56 rating implies that you would have to safeguard the Sonos speakers if you are trapped in a rainstorm.
It is also not advisable to put the Sonos speakers outdoors but Sonos has put up a good pattern in creating the move more strongly than any of its forenamed speakers most important is considering that it would be subjected to many environments.
However, the IP56 rating as said earlier conveys that you have to secure the Sonos speakers in a rainstorm. I have listed the steps to follow when your speakers get wet and also the steps to follow if you want to connect your speaker to your TV wirelessly:
Connect your Sonos speakers to the TV via Bluetooth only on Bluetooth enabled TVs and speakers, make use of the Sonos application to connect the system but connect in the exact sound and Make use of an APTX BT transmitter as a sound receiver that connects to the TV without wanting a wired connection to your speakers.
I also discovered that you cannot connect an external speaker to a TV and not all TVs have Bluetooth. I hope I have been able to answer every one of your questions, and I hope you’d be able to get every one of the steps that were listed in this article.
Do not hesitate to ask more questions and contribute to these questions in the comment section. I would be so glad to answer your questions and also learn from you. We hope to hear from you soon. Cheers.