This post contains affiliate links. Read the full disclosure here.
The Bose sound system is a worthy addition to add to one’s household appliances, and if you have ever asked the question “can Bose speakers be used with any receiver?” it’s only normal since one will actually need a very large budget to get both a Bose speaker and a receiver at the same time.
To answer your question, YES, you can use a Bose speaker on any receiver. However, you will need a Bose speaker adapter to properly convert the plugs. This will enable Bose speakers to easily link up with other receivers without any problem.
The following steps will guide you through the process.
Read Also: Can You Use Bose Headphones While Charging?
How to connect Bose speakers with other receivers
Step 1: Connect your adapter to the speaker
After purchasing your Bose adapter from an accredited dealer/store like Amazon, place it at the appropriate point on the receiver (the receiver manual should guide you on this path), then insert your Bose speaker cable into the correct jack on the Bose adapter you just placed on the receiver. Ensure the receiver is switched off for the entire duration of the connection.
Step 2: Remove the insulation strands on the wire
For an enjoyable experience, you are advised to remove at least half of the insulation from the strands of wires right at the ends of the wire. This will help the wire with the right contacts when connected to the adapters.
Step 3: Place the wires correctly
The adapters should have colours to help you identify the right holes to place the wires. Insert the red part of the speaker wire in the red segment or terminal of the adapter — you can do this by pressing down or lifting (depending on the terminal purchased) the spring clip to properly expose the hole. Repeat this procedure for the black wire as well. Gently tug the wire to confirm how firm they are placed — if the wires come off with the slightest touch, then you have to repeat the process.
Step 4: Remove the insulation from the other end of the wire
This step should be carried out to connect the second House speakers. Repeat the stripping process at the other end of the wire.
The insulation removed should not exceed a half-inch to get the best outcome — just like you did the first one. Connect the wires to their respective colours on the adapter to have the best result.
Step 5: Turn on the receiver
Once you are through with the connections, switch on the receiver to link your Bose speakers by touching the speaker button located at the speaker control panel. Ensure the press the button that corresponds to the terminal you place the speakers. For example, if your speakers are connected to the terminal Labeled “Speaker system 2”, press the switch that corresponds, or that’s labelled “speaker system 2“.
It allows you to make the necessary adjustments to the volume of your speakers.
You should have your speakers blaring in no time as long as you follow the right process. The steps explained above are also better suited to the Bose Lifestyle speakers.
Read Also: Can You Use Bose Headphones For Shooting?
Can I use Bose speakers without the Acoustimass module?
I really don’t think there is anything we can’t do as humans, you could even choose to live under a rock, but in the end, it all boils down to what you really want. The reason why you chose to purchase a Bose speaker is obvious — good music rendition — you wanted to get every note the singer and producer put in the song. If you truly want the best music blaring from your Bose speakers, NEVER use it without an Acoustimass module.
What are Acoustimass modules
Acoustimass modules are subwoofers that give you that balance bass effect when in use, to provide you with the real sound input invested in a soundtrack. Imagine listening to Pop smoke’s DIOR without the bass effect of the song — Ewwww right?
Acoustimass modules are like what you call the Robin to a batman when it comes to the small cube speakers. They help in assisting the small cube speakers to provide the necessary low notes.
To simply put it — Acoustimass modules are the heartbeat of the Bose speaker collection, and as we already know, no one can truly exist without their hearts.
Do Bose speakers need amplifiers?
Just like any speaker you are likely to find on the market, Bose speakers also need amplifiers (Like BT20A Bluetooth 5.0 Stereo Audio 2 Channel Amplifier Receiver) to function. While some might not see its importance, amplifiers help to provide access with which the signals are boosted, especially in loudspeakers. However, most modern loudspeakers have built-in amplifiers that work perfectly with their drivers.
Separate amplifiers help to ignite the sound that emanates from passive loudspeakers. The pairing of a normal speaker without an amplifier and an actual amplifier is paramount to getting the best result possible.
Read Also: Can You Use Bose Headphones For PS5?
There are various levels of the audio signal which includes the following;
- Speaker level
- Headphone level
- Line level
- Instrument level
- Mic level
For you to properly match an amplifier with a speaker, one has to get acquainted with the required levels and finding the best possible match or paring. You should note that not all power amplifiers are capable of driving loudspeakers.
There is a methodology when it comes to matching the right amplifier with the right loudspeaker, and it all boils down to the following; power rating, impedance, and sensitivity – these three factors will always determine if an amplifier is suited for your loudspeaker or not.
How do I reset my Bose subwoofer?
Various reasons can cause you to want to reset your Bose subwoofer which can include; accidentally uninstalling the app, getting a new phone, changing your surrounding setting, and so on. However, the logical thing to do would be to reset the soundbar – the steps below should guide you accordingly.
Step 1: Turn off the soundbar
Before attempting to reset the soundbar, ensure you turn off the soundbar. This will give your Bose speaker the sense of starting afresh when it is later turned on.
Step 2: Remove the soundbar power cord from the outlet
Just like turning off your soundbar, you are also required to completely remove the power cable from any power outlet in use. This process is essential for the proper resetting of the soundbar.
Once this is done, you are required to wait for at least 30 seconds before plugging it back to the power source. This process will ensure that the soundbar is thoroughly reset. Wait for another 30 seconds to ensure that the system is completely rebooted before using testing out the soundbar.
If you also feel the need to reset your bass module, the following steps below will be of great assistance.
Read Also: Can You Overcharge Bose Headphones?
Resetting your bass module
Step 1: Unplug the power chord from the outlet
Just like the soundbar reset protocol, you are required to unplug the bass module power chord from the power outlet for the reset to properly occur, then wait for about 30 seconds before carrying out the next step.
Step 2: Plug in the bass module power cord
After waiting for 30 seconds, plug back the power cable in the power outlet available, then wait for about 15 seconds for the bass module to simply power-up before reconnecting.
These steps should solve any issues you might have regarding your soundbar and your bass module.
How do I pair my Bose 300 subwoofer?
Pairing a Bose 300 subwoofer has seemed to be challenging for some persons, but the following steps should help in that regard.
Step 1: Power up your bass module
Ensure your Bose 300 subwoofer is plugged in a power outlet before pairing. It’s funny to think that some persons forget something as basic as plugging your Bose speaker into a power source.
Step 2: Activate the SoundTouch
The next step will require you to press the soundtouch button. Once you do this, press and hold number 7 till the connectivity indicator located on the soundbar blinks white. The white light simply means that the pairing is complete.
Once the pairing is completed, either the bass module or the surround speakers will emit a calm tone to indicate the completion of the entire process to complete the white light glowing on the soundbar.
If you are using the app, you can follow the following process below.
Step 1: Plug in the speaker
Plug in your bass module to a power outlet, and just like the first method, this is necessary before any sort of pairing can happen.
Step 2: Open the app on your phone
Open the Bose Music app on your phone, then press the My Bose icon which can be seen at the top-left corner of the app. My Bose icon will grant you access to the soundbar area of your speaker. Click on the soundbar image – it should be located at the bottom right corner of your screen.
After clicking on the soundbar image, click on the following using the same order as spelt out below.
- Add Bose
- Accessory speakers
Simply follow the instructions and you will be fine. Note that this setting is also applicable for other versions of Bose speakers.
How do I connect my Bose surround sound to my TV?
One of the many reasons we purchase a Bose speaker is to get the best out of Netflix and any other activity we might want to carry out on our TV. The following steps below will show you how to connect a Bose surround to the TV.
Step 1: Know the right place to place your speaker
You must get the feel of every sound emanating from your Bose speakers – none of it should go to waste. Try placing your speakers 2-3 feet from the wall. This distance will help to reduce sound reflection which can harm your playback clarity. Also, try placing your speakers inwardly to face the listener. Once this is achieved, plug in your speaker to the nearest power source.
Step 2: Connecting using an HDMI cord
If you have an HDMI cord, use it to connect it to a high-speed HDMI port (Like this Amazon Basics 10.2 Gbps High-Speed 4K HDMI Cable with Braided Cord) on your TV to your speaker. You can also try connecting other inputs that might be available on your TV such as a blu-ray player.
Step 3: Go to the TV menu
After connecting the necessary cables, go to your TV menu and enable the CEC and ARC as the case may be on your TV, but you should note that this setting is sometimes enabled by default in some TVs. Once this is enabled, you should be able to hear the audio from your TV through your Bose speakers.
However, if your TV doesn’t have an HDMI-enabled port, or if you elect not to prefer the HDMI option, you can still connect it using the optical-in and optical-out option.
How to connect my Bose speaker without an HDMI
Try connecting the optical-in jack on your speaker to the optical out jack on your TV. Some TVs have it labeled as digital-in and digital-out. You can also try using the headphone option on your TV. Some TVs might not have the optical output option – in this case – simply join the aux-in jack option on your BOSE speaker to the 3.5 mm dual RCA jack outputs located on the TV. Some TVs might choose to label these jacks as headphones or audio out.
After affirming the connection, use the TV remote control to access the menu, then try looking for the sound or audio setting. Once located, disable the TV speakers. Search for the audio output option, then set it to fixed, or simply increase the volume of your TV to its maximum.
Can Bose Speakers Be Used With Any Receiver – Conclusion
Despite some critics from some nerds, Bose is known for their elegance and charisma side from the lovely sounds they emit from their offers. If the ratings and reviews are anything to go by, then it’s fair to say that Bose is one of the leading companies in the speaker community.
I hope was able to answer some of your questions. Kindly drop your comments and suggestion in the comment section for further deliberation. I look forward to hearing from you. Cheers!!.